When your log home settles the load increases on your Screw-Jacks. Timely adjustments are especially important in the first few years when the most settling occurs. Occasionally an increased load can happen and leveling can be a difficult task. Nortek® has addressed this situation with the Nortek® Leveler. Not your typical Screw-Jack: they all handle the load...only one is designed for adjusting, even in tight spots.

Availiable in two sizes:

Nortek® Leveler #6680

Specifications:

• Plated with a High Quality Zinc Phosphate Process
• 1" - 10 ACME Thread.
• 20,000 lb vertical load capacity.
• 6"x6" square mounting plates with 8" of total adjustment..
• 8" adjustment with screw support
• Lowered height of 1 3/8".
• 1 3/8 " diameter x 10" deep hole in post.
• Adjustable with punch & sledge in tight areas or to relieve initial load.

Advantages:

• Plated with a High Quality Zinc Phosphate Process that serves as an anticorrosive & lubricates. This process passes over 10 military & automotive specifications.
• Bronze bearing reduces nut turning force.
• ACME thread has a high strength thread profile & reduces friction.
• Increased support area at the Spider Nut & the Bronze Bearing.
• Nortek's exclusive Spider Nut provides easier adjustment with increased load displacement.
• Precision manufactured for strength & durability.

Nortek® Leveler #4430

Our new smaller version Nortek® Leveler has all the features and vertical load capacities as our original Nortek® Leveler but with 3" of adjustment travel.  This leveler is ideal for homes built from dead-standing timbers or kiln dried timbers where your setting is minimal but should still be addressed.Another application...This is an excellent solution for the setting of deck support posts and preserving the structural integrity of your deck.  All homes settle and the first place it usually becomes noticeable is when you walk out on your deck. Why not eliminate that possibility by having the ability to adjust! This Nortek® Leveler will do just that for the years to come and also prevent moisture wicking up that deteriorates your support posts.

Specifications:

• Plated with a High Quality Zinc Phosphate Process
• 1" - 10 ACME Thread.
• 20,000 lb vertical load capacity.
• 4"x4" square mounting plates with 3" of total adjustment..
• 3" adjustment w/o screw support
• Lowered height of 1 3/8".
• Adjustable with punch & sledge in tight areas or to relieve initial load.

Advantages:

• Plated with a High Quality Zinc Phosphate Process that serves as an anticorrosive & lubricates. This process passes over 10 military & automotive specifications.
• Bronze bearing reduces nut turning force.
• ACME thread has a high strength thread profile & reduces friction.
• Increased support area at the Spider Nut & the Bronze Bearing.
• Nortek's exclusive Spider Nut provides easier adjustment with increased load displacement.
• Precision manufactured for strength & durability.